Wds Mode (5Ghz) - D-Link DAP-2660 User Manual

D-Link DAP-2660 User Manual

WDS Mode (5GHz)

Wireless Band:
Select the wireless band used here. Options
to choose from are 2.4 GHz and 5 GHz. In this
section we'll explain the 5GHz wireless band.
Mode:
Select wireless mode used here. Options to
choose from are Access Point, WDS with AP,
WDS, and Wireless Client. In this section we'll
explain the WDS with AP wireless mode.
Network Name (SSID): Enter the Service Set IDentifier (SSID) used here.
This name is designated for a specific Wireless
Local Area Network (WLAN). By default, the SSID is
dlink. The SSID can be easily changed to connect
to an existing wireless network or to establish a
new wireless network. The SSID can be up to 32
characters and is case-sensitive.
SSID Visibility: Select Enable to broadcast the SSID across the
network, thus making it visible to all network
users. Select Disable to hide the SSID from the
network.
Auto Channel
This feature can only be used in the Access Point
Selection: mode.
Channel: All devices on the network must share the same
channel. To change the channel, use the drop-
down menu to make the desired selection. (Note:
The wireless adapters will automatically scan and
match the wireless settings.)
29