Ap Array - D-Link DAP-2695 User Manual

D-Link DAP-2695 User Manual
The AP Array window allows users to create a set of devices on a network that are organized into a single group in order to increase ease of
management. Once a user has made the desired settings, click the Save button to let the changes take effect.
Enable AP Array: This check box allows the user to enable the AP array
function. The three modes that are available are Master,
Backup Master, and Slave. APs in the same array will use
the same configuration. The configuration will sync
the Master AP to the Slave AP and the Backup Master
AP when a Slave AP and a Backup Master AP join the

AP array.

AP Array Name:
Enter a user-selected name for the AP array you have
created.
AP Array Password: Enter a user-selected password that will be used to
access the AP array you have created.
Scan AP Array List: Click this button to initiate a scan of all the available
APs currently on the network.
AP Array List:
This table displays the current AP array status for the
following parameters: Array Name, Master IP, MAC,
Master, Backup Master, Slave, and Total.
Current Array Members: This table displays all the current array members. The
DAP-2695 AP array feature supports up to eight AP
array members.
AP Array
36