D-Link DAP-2662 Quick Installation Manual

D-Link DAP-2662 Quick Installation Manual

Wireless ac1200 wave 2 dual-band poe access point
Hide thumbs Also See for DAP-2662:

Advertisement

Quick Links

Building Networks for People
Quick Installation Guide
Wireless AC1200 Wave 2 Dual-Band PoE Access Point
This document will guide you through the basic
installation process for your new access point.
DAP-2662
Documentation also available
via the D-Link Website

Advertisement

Table of Contents
loading

Summary of Contents for D-Link DAP-2662

  • Page 1 Building Networks for People Quick Installation Guide Wireless AC1200 Wave 2 Dual-Band PoE Access Point This document will guide you through the basic installation process for your new access point. DAP-2662 Documentation also available via the D-Link Website...
  • Page 2: Before You Begin

    Before You Begin Hardware Overview This installation guide provides instructions LED Indicators for installing the DAP-2662 on your network. Additional documentation is also available on the D-Link support website. • D-Link Nuclias Connect User Manual: For additional information and instructions on how to configure the device using D-Link Nuclias Connect.
  • Page 3: Powering The Access Point

    (UI). Refer to the DAP-2662 User Use a standard Ethernet cable to connect the Manual for detailed configuration instructions. LAN port on the DAP-2662 to a PoE power source device such as a PoE switch or PoE injector. (Optional) Using the power adapter...
  • Page 4: Mounting The Access Point

    Mounting the Access Point Align and place the mounting plate on top of the anchors and use the included The DAP-2662 can be mounted on a wall or screws to secure the mounting plate to ceiling for optimal coverage. the surface.
  • Page 5: Additional Information

    Figure 9: Attaching the Mounting Plate Connect the Ethernet cable and power adapter (optional) to the device. Attach the DAP-2662 to the mounting plate by placing it onto the plate and rotating clockwise until the device locks into place. Reboot/Reset the Access...
  • Page 6 Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
  • Page 7 Innovation, Science and Economic Development Canada (ISED) Statement: This Class B digital apparatus complies with Canadian ICES-003. Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada. Innovation, Science and Economic Development Canada (ISED) Statement: This device complies with ISED licence-exempt RSS standard(s).
  • Page 8 Product and Warranty Information To find out more about D-Link products or marketing information, please visit the website http:// www.dlink.com. The D-Link Limited Lifetime Warranty information is available at http://warranty.dlink.com/ 位置: 中文使用說明書 電池使用安全說明 低功率警語 : • 經型式認證合格之低功率射頻電機,非經許可,公司、商號或使用者均不得擅自 變更頻率、加大功率或變更原設計之特性及功能。 • 低功率射頻電機之使用不得影響飛航安全及干擾合法通信;經發現有干擾現象...

Table of Contents