D-Link DAP-2660 User Manual page 26

Airpremier wireless ac1200 concurrent dual band poe access point

Hide thumbs Also See for DAP-2660:

Table of Contents

D-Link DAP-2660 User Manual

Channel Width:

Allows you to select the channel width you would like to operate in. Select 20 MHz if you are not using any 802.11n wireless

clients. Auto 20/40 MHz and Auto 20/40/80 MHz allows you to connect to both 802.11n and 802.11b/g or 802.11a wireless

devices on your network.

Captive Profile:

Select the enable or disable the captive portal feature here.

Remote AP MAC

Enter the MAC addresses of the APs on your network that will serve as bridges to wirelessly connect multiple networks.

Address:

Site Survey:

Click on the Scan button to search for available wireless networks, then click on the available network that you want to

connect with.

Authentication:

Select the wireless authentication method to use here. In the WDS with AP mode, the following authentication methods are

supported: Open System and WPA-Personal.

For more information about the wireless security, refer to

page

14.

Table of Contents

Airpremier dap-2660