Wireless Client Mode (2.4Ghz) - D-Link DAP-2660 User Manual

D-Link DAP-2660 User Manual

Wireless Client Mode (2.4GHz)

Wireless Band:
Select the wireless band used here. Options
to choose from are 2.4 GHz and 5 GHz. In this
section we'll explain the 2.4GHz wireless band.
Mode:
Select wireless mode used here. Options to
choose from are Access Point, WDS with AP,
WDS, and Wireless Client. In this section we'll
explain the Wireless Client mode.
Network Name (SSID): Enter the Service Set IDentifier (SSID) used here.
This name is designated for a specific Wireless
Local Area Network (WLAN). By default, the SSID is
dlink. The SSID can be easily changed to connect
to an existing wireless network or to establish a
new wireless network. The SSID can be up to 32
characters and is case-sensitive.
SSID Visibility: This option is not configurable in the Wireless
Client mode.
Auto Channel
This option is not configurable in the Wireless
Selection: Client mode.
Channel: This option is not configurable in the Wireless Client mode.
Channel Width: This option is not configurable in the Wireless Client mode.
Click on the Scan button to search for available wireless networks, then click on the available network that you want to connect
Site Survey:
with.
31