Ipv6 - D-Link DAP-2660 User Manual

D-Link DAP-2660 User Manual
This access point is IPv6 ready. An IPv6 address can be manually configured or automatically obtained from a DHCPv6 server. This IPv6 address is
only applicable to the LAN side of the local network and is not visible from the Internet.
Enable IPv6: Select the checkbox to enable the IPv6 option of
this access point.
Get IP From:
Select the method that will be used by this access
point to obtain an IPv6 address. Options to choose
from are Static and Auto. Select the Auto option
if this access point can obtain IPv6 settings from
a DHCPv6 server on the local network. Select the
Static option to manually enter the IPv6 settings
in the spaces provided.
IP Address:
Enter the IPv6 address for this access point here.
Prefix:
Enter the IPv6 prefix value for this access point
here.
Default Gateway: Enter the default gateway's IPv6 address here.

IPv6

36