Section 3 - Configuration
An AP array is a set of devices on a network that are organized into a single group to increase ease of management.
Enable Array:
This check box allows the user to enable the AP array function.
The three modes that are available are Master, Backup
Master, and Slave. APs in the same array will use the same
configuration. The configuration will sync the Master AP to
the Slave AP and the Backup Master AP when a Slave AP and
a Backup Master AP join the AP array.
AP Array Name:
Enter a name for the AP array you have created.
AP Array
Enter a password that will be used to access the AP array you
Password:
have created.
Scan AP Array
Click this button to initiate a scan of all the available APs
List:
currently on the network.
AP Array List:
This table displays the current AP array status for the following
parameters: Array Name, Master IP, MAC, Master, Backup
Master, Slave, and Total.
Current Array
This table displays all the current array members. The DAP-
Members:
1353 AP array feature supports up to eight AP array members.
D-Link DAP-1353 User Manual
AP Array
40