Access Point Mode (2.4Ghz) - Wpa Enterprise - D-Link DAP-2660 User Manual

D-Link DAP-2660 User Manual
WPA-Enterprise (EAP) requires the user to install a RADIUS server on the network for authentication. Comparing WPA-PSK with WPA-EAP, WPA-
PSK is seen as a weaker authentication but comparing WPA-PSK to WEP, WPA-PSK is far more secure than WEP. WPA-EAP is the highest level of
wireless security a user can use for wireless today. WPA2 is an upgrade of WPA. WPA2 yet again solves some possible security issues found in WPA.
WPA2 has two variations called WPA2-Personal (PSK) and WPA2-Enterprise (EAP) which is the same as found with WPA.
Authentication: Select the wireless authentication method to use here. Options to choose from are Open System, Shared Key, WPA-Personal,
WPA-Enterprise, and 802.1X. After selecting the WPA-Enterprise option, the following parameters will be available for
configuration.
WPA Mode: Select the WPA mode here. Options to choose
from are AUTO (WPA or WPA2), WPA2 Only,
and WPA Only. WPA and WPA2 use different
algorithms. AUTO (WPA or WPA2) allows you to
use both WPA and WPA2.
Cipher Type: Select the WPA cipher type here. Options to
choose from are AUTO, AES, and TKIP..
Group Key Update Enter the interval during which the group key will
Interval: be valid. By default, this value is 3600 seconds.
Network Access Select to Enable or Disable the network access
Protection: protection feature here.
RADIUS Server Mode: Select the RADIUS server mode here. Options to
choose from are External and Internal.
Primary RADIUS Enter the primary RADIUS server's IP address or
Server:
domain name here.
Primary RADIUS Port:
Enter the primary RADIUS server's port number
here.
Primary RADIUS Enter the primary RADIUS server's secrect
Secret:
passphrase here. This secrect is in the ASCII form.

Access Point Mode (2.4GHz) - WPA Enterprise

17