Ap Array; Ap Array Scan - D-Link DAP-2360 User Manual

Section 3 - Configuration
The AP Array window is used to create up to 32 APs on a local network to be organized into a single group in order to increase
ease of management. Click the Save button to let your changes take effect. Central WiFiManager and AP Array are mutually
exclusive functions.
Enable AP
Select the check box to enable the AP array
Array:
function. The three modes that are available
are Master, Backup Master, and Slave. APs in the
same array will use the same configuration. The
configuration will sync the Master AP to the Slave
AP and the Backup Master AP when a Slave AP
and a Backup Master AP join the AP array.
AP Array Name:
Enter an AP array name for the group here.

AP Array

Enter an AP array password for the group here.
Password:
This password must be the same on all the APs
in the group.
Scan AP Array
Click this button to initiate a scan of all the
List:
available APs currently on the network.
Connection
Display the AP array connection status.
Status:
AP Array List:
This table displays the current AP array status for
the following parameters: Array Name, Master
IP, MAC, Master, Backup Master, Slave, and Total.
Current
This table displays all the current array members.
Members:
The DAP-2360 AP array feature supports up to
eight AP array members.
D-Link DAP-2360 User Manual
AP Array

AP Array Scan

46