Ap Array - D-Link DAP-2310 User Manual

5GEVKQP   %QP IWTCVKQP
#P #2 CTTC[ KU C UGV QH FGXKEGU QP C PGVYQTM VJCV CTG QTICPK\GF KPVQ C UKPING ITQWR VQ KPETGCUG GCUG QH OCPCIGOGPV
Enable Array:
This check box allows the user to enable the AP array
function. The three modes that are available are Master,
Backup Master, and Slave. APs in the same array will
WUG VJG UCOG EQP IWTCVKQP 6JG EQP IWTCVKQP YKNN U[PE
the Master AP to the Slave AP and the Backup Master
AP when a Slave AP and a Backup Master AP join the

AP array.

AP Array Name: Enter a name for the AP array you have created.
AP Array Enter a password that will be used to access the AP
Password: array you have created.
Scan AP Array Click this button to initiate a scan of all the available
List: APs currently on the network.
AP Array List: This table displays the current AP array status for the
HQNNQYKPI RCTCOGVGTU #TTC[ 0COG /CUVGT +2 /#%
Master, Backup Master, Slave, and Total.
Current Array This table displays all the current array members. The
Members:
DAP-2310 AP array feature supports up to eight AP
array members.
D-Link DAP-2310 User Manual
AP Array
40