Filters; Wireless Mac Acl - D-Link DAP-2660 User Manual

D-Link DAP-2660 User Manual
This page allows the user to configure Wireless MAC ACL settings for access control. Click the Save button to accept the changes made.
Wireless Band: Select the wireless band used here. Options to
choose from are 2.4 GHz and 5 GHz.
Select Disable to disable the filters function.
Access Control List:
Select Accept to accept only those devices with
MAC addresses in the Access Control List. All other
devices not on the list will be rejected.
Select Reject to reject the devices with MAC
addresses on the Access Control List. All other
devices not on the list will be accepted.
MAC Address: Enter each MAC address that you wish to include
in your filter list, and click Apply.
MAC Address List: When you enter a MAC address, it appears in this
list. Highlight a MAC address and click Delete to
remove it from this list.
Current Client This table displays information about all the
Information:
current connected stations.
Upload ACL File:
Here users can upload a pre-configured wireless MAC ACL settings configuration file to the access point which will overwrite
the current wireless MAC ACL settings. Click the Browse button to navigate to the configuation file, located on the local PC,
and then click the Upload button to initiate the upload.
Load ACL File to Local
Here users can download the current wireless MAC ACL settings, in a configuration file, to the local PC, that serves as a backup
Hard Drive: when needed. Click the Download button and navigate to the destination where the file can be saved on the local PC.

Filters

Wireless MAC ACL

76