Connecting The Serial Port (Optional) - Alcatel Speed Touch Wireless User Manual

2.4

Connecting the Serial Port (Optional)

Serial access
Requirements for using
the serial access
Procedure
3EC 17766 AAAA TCZZA Ed. 01
Like most routers, the STWireless carries a serial port on its rear
panel, featuring access from a remote host via a modem
connection, or local access from a terminal.
For access via the serial port, you must have the following:
A serial cable
"
An ASCII terminal (VT100), or a workstation/PC with ASCII
"
terminal emulation, or emulation application, for local
configuration via the CLI,
or
A (voiceband) modem, for allowing remote configuration of
"
the STWireless via the CLI.
Proceed as follows to connect the STWireless serial port:
Step Action
1 Determine the serial port on the rear panel of your
STWireless.
2 Connect the serial cable to the STWireless serial port.
3 Connect the other end of the serial cable to the serial
interface of the (emulated) ASCII terminal, or modem.
2 Wiring Guide - ADSL, Power and Console
33 / 362