Alcatel Speed Touch Wireless User Manual page 204

11 Networking Services - IP
CAUTION
204 / 362
Bridging & DHCP Service
The STWireless DHCP server is by default enabled (via Auto
DHCP).
In case you use your STWireless in Bridging mode and your ISP
requires you to enable DHCP in your PC(s), you must disable the
DHCP server inside the STWireless to avoid conflicts between two
DHCP servers being active at the same time.
Setting the DHCP modes of your STWireless is described in
section 11.3.3.
3EC 17766 AAAA TCZZA Ed. 01