Cli Command Basics - Alcatel Speed Touch Wireless User Manual

19.2.3

CLI Command Basics

Introduction
General CLI
information
CLI help
Navigating through CLI
levels
3EC 17766 AAAA TCZZA Ed. 01
19 Maintenance - Speed Touch Wireless Command Line Interface
Although it is not the aim of this subsection to give a complete
overview of all possible configurational STWireless items, this
subsection describes some of the generalities of the native CLI
environment.
Once you accessed your STWireless, you will get the CLI prompt:
=>.
From this point you can start entering your commands.
The CLI access is structured in what is called levels".
The => prompt indicates that you are in the root" level of CLI.
Typing help at the root prompt shows you the available
command groups:
=>help
Following commands are available :
help
?
exit
..
Following command groups are available :
dhcp dns
bridge pptp
qosbook phonebook
config firewall
=>
Entering the name of a command group, accesses you to this
specific level.
For example , entering =>config followed by pressing 'Enter',
brings you to the 'config' level.
This is indicated by its own prompt:
: Displays this help information
: Displays this help information
: Exits group selection.
: Exits group selection.
td
ppp
ip
[config]=>
atmf mer
cip nat
software system
295 / 362