Alcatel Speed Touch Wireless User Manual page 172

9 Data Services - Classical IP & IP Routing
Result
Note
172 / 362
Step Action and Description
3 Depending the RFC1577 compliancy of the remote access router, the
following must be filled in, in the 'Remote IP address' column of the
CIP PVC:
Compliancy
YES
NO
4
Click
5 Repeat steps 2, 3 and 4 until all provided cross connects are added
to the 'CIP Connections' table.
6
Click
The CIP PVCs you have added, appear in the 'CIP Connections'
table.
However, check whether the remote IP addresses get resolved on
these new CIPPVCs.
If yes, check IP connectivity with the remote device via a ping utility
on one of the local PCs.
As your SP is responsible for the cross connects, check whether he
supports this advanced configuration.
Remote IP Address
You don't have to fill in anything;
the InATMARP reply will implicitly
assign the PVC to the CIP
member.
You must fill in the exact IP
address of the remote access
router; the PVC is explicitly
assigned to the CIP member
to store the changes in permanent memory.
3EC 17766 AAAA TCZZA Ed. 01