Alcatel Speed Touch Wireless User Manual page 302

AppendixA Troubleshooting
Trouble solving table
302 / 362
The following table provides possible solutions to some problems:
Problem
STWireless does not work.
(none off the LEDs lights up)
No Ethernet connectivity.
No Wireless connectivity.
Telnet session from a Windows
PC is not possible.
Poor STWireless ADSL
performance.
Windows Error 730.
(Windows98/98SE)
Solution
Make sure the STWireless is
plugged into an electrical
outlet.
Make sure the power switch on
the STWireless modem is
turned on.
Make sure the cable(s) are
securely connected to the
10Base T port.
Make sure you are using the
correct cable type for your
Ethernet equipment.
Make sure your WLAN adapter
is compliant to the STWireless
WLAN standards.
Make sure both STWireless
and WLAN adapter are
configured for the same
regulatory area.
The STWireless system
password is longer than 8
characters.
Change the STWireless system
password.
Make sure the STWireless is
installed as instructed in this
user manual.
TCP/IP is not installed on your
PC. Install the TCP/IP protocol
suite on this PC.
3EC 17766 AAAA TCZZA Ed. 01