Using The Sro Program (Simple Set Up) - BLUE SKY AUDIO MANAGEMENT CONTROLLER Manual

USING THE SRO PROGRAM (SIMPLE SET UP)

1. Connect the ART USB Dual Pre output to Analog 8 In on the AMC
2. Connect the ART USB cable to the a USB 2.0 port.
3. Using a microphone stand set the measurement microphone at your listening position and
at ear height.
4. Connect the microphone to the LEFT Input on the ART USB Dual Pro. Set the Left Gain
control on to 18.
5. Connect the RIGHT Output of the ART to the RIGHT Input. Set the Right Gain to 3.
6. Connect the Left Output of the ART Dual Pre to the CH 8 analog input on the AMC.
7. On the rear of the ART set the MIX Knob FCW to Computer.
8. On the rear of the ART set the LEVEL knob to 12 o'clock (straight up)
9. On the rear of the ART press the PHANTOM IN.
10. On the rear of the ART press the power switch in
Page 32