Table of Contents
Advertisement
CROSS MIXER
The cross mixer screen – when you click on the cross mixer box on the main screen it will
open up a new screen as
and digital) are routed to each output. The gain can be entered directly in the box or to mute
an input type in "off" or "OFF" in the box. In addition to entering gain values directly in the
boxes, you can now double click on the box to set the gain 0,-3 and OFF. The LFE box cycles
from 10, 0, to OFF.
If bass management is turned OFF (see Bass Management), the non - LFE feeds to the LFE
output channel will be disabled and displayed in red indicating that they cannot be changed. If in
this state, the user will have to go to the base management screen and turn bass management ON
before these values can be edited.
The gray buttons along the right side configure the mixer to common settings. These buttons only
program the cross mixer and do not affect EQ or crossover values.
Note: In some cases, as in theatrical movies releases, the surrounds are 3 db down from the main
speakers. If that is the case, you also want to drop the surround feeds to the subwoofer. For
example, you would set LS IN to LS OUT at -3 dB, and then also set LS IN to LFE out at -3 dB.
To go back to the main AMC control screen click the X in the upper right-hand corner of the screen
follows.The cross mixer screen shows how each inputs (analog
Page 21
Advertisement
Table of Contents
