Table of Contents
Advertisement
DIM/CANCEL – reduces the current system gain by the DIM value. The default setting is -10 dB.
The default setting can be changed utilizing the menu or the AMC Control Software. The
DIM/CANCEL switch is also used to exit the menu mode
MUTE MODE – the Solo/ Mute channel buttons operate in mute mode. Switching between Solo
and Mute modes clears all solo/mute buttons
SOLO MODE – the Solo/ Mute channel buttons operate in a Solo Mode. Switching between Solo
and Mute modes clears all solo/mute buttons.
SOLO/MUTE – Solo's or Mutes that channel. Solo buttons can now be pressed in unison. For
example if you want to solo L, C, R. so can press those buttons all at once.
PRESETS – loads the preset.
MENU – allows a limited number of parameters to be changed on a preset. When exiting the
menu mode, the changed parameters are automatically stored in flash memory.
REMOTE MENU LOCKOUT- Access to the full menu can be restricted by requiring the user to
enter a 4 digital access code. If this feature is activated, whenever the menu button is pressed, the
user will have to use the preset buttons to input the correct 4 digital code to access the full menu.
A limited user menu can be access by hitting the menu button again. This feature can be turned on
or off and the access code changed using the AMC control software remote code.
REAR PANEL
USB 2.0 CONNECTOR - used for firmware updates to the remote
REMOTE MAIN RS232 - Connects the Remote to the AMC rack
Page 11
Advertisement
Table of Contents
