BLUE SKY AUDIO MANAGEMENT CONTROLLER Manual page 19

DISPLAY dBSPL – turn the dBSPL display on and off.
Reference Gain- displays the current reference gain setting. The reference gain for this preset can
be modified directly by typing in the new value in the box. This value will also be updated if the
reference gain setting is changed through the remote
Dim Gain- displays the current dim gain setting. The dim gain setting for this present can be
modified directly by typing in value in this box. This value will also be updated if the dim gain
setting is changed through the remote
System Sample Rate- shows the current internal sample rate of the AMC. This value can only be
changed through the remote.
Loading a preset – loads a preset Click on the blue buttons in the upper left hand corner of the
Presets can also be loaded by hitting a button on the remote, which will be indicated on the AMC
screen.
Saving a preset – saves the currently loaded preset to the AMC rack. A loaded preset can be
saved to itself or to any other preset location.
Preset display – these 3 lines of text are what will appears on the remote when a preset is loaded.
Each line of text can be changed directly using the keyboard.
Remote Access Code - a 4 digit access code for the remote menu . Since the preset buttons are
used to enter the code, only digits 1 to 6 are allowed.
Restrict Remote Menu Enable- when checked requires the user to enter the correct 4 digit code
to access the full Remote Menu.
SRO- opens up the speaker room optimization panel.
Save Presets to File- pressing this button will open up a dialogue to save all presets to a text file.
The text file is in a human readable form and has all the parameters the makeup the preset.
Load Presets From File-loads a previously saved preset file.
Analog +12dB/ +24 dB Max switch – Switch the analog IO between +12 and +24 dB maximum
output level.
Digital in lock status box – shows whether a digital input has a valid digital signal attached.
16 In 8 Out Mixer- opens up the cross mixer panel (see CROSS MIXER )
Base Management- opens up the base management panel ( see Base Management)
EQ buttons- opens up the channel equalizers(see EQ).
Channel Calibration – sets the relative balance between the channels. These values can be
Page 19