Table of Contents
Advertisement
QUICK SETUP AND USE
The AMC comes with six default which are a mix of digital and analog.
Any preset can be reconfigured to analog or digital or a mix
The display has a short description of the presets. These presets can be modified on a limited
basis using the menu on the remote or completely reconfigured using the AMC Control Software.
1. Connect Audio I/O cables to the AMC and your speaker system.
2. Connect AMC Remote to AMC Rack using supplied Cat 5/6 cable.
3. Connect power cable to AMC Rack.
4. Turn on Rack AC power switch.
5. Wait until front panel LED is flashing and remote mutes.
6. Power-up your speakers.
7. Hit mute button to cancel mute.
8. Enter menu and scroll to Pink Noise.
9. Hit Menu button to switch to parameter mode.
10. Scroll through pink noise channels to verify audio is coming from correct speakers.
Note: The level will be low.
11. Hit Menu to return to Menu scroll mode.
12. Hit Dim/Cancel to return to normal operation.
Page 14
Advertisement
Table of Contents
