entered directly in the boxes or entered automatically using the SRO procedure. See the Speaker
Room Optimization (SRO) section below for more information.
Channel delay in milliseconds - sets the individual time delay for each channel output and is
used to time align the speakers.
Lip sync delay in milliseconds- set some master time delay for all channels both digital and
analog and is used mainly match audio to picture .
Analog gain dB - master offset for the analog outputs and is normally used when operating with
digital in and analog out.
Digital gain dB - master offset of the digital outputs and is normally used when operating analog
in to digital out
Grey preset setup buttons- the buttons along the bottom of the screen, set up the loaded preset
to a common set up values.
Page 20