Inspecting And Cleaning; Visual Inspection - GE MAC 5000 Operator's Manual

Maintenance: Inspecting and Cleaning

Inspecting and Cleaning

Precautions
n
Turn off the system before inspecting or cleaning.
n
Do NOT immerse any part of the equipment in water.
n
Do NOT use organic solvents, ammonia based
solutions, or abrasive cleaning agents which may
damage equipment surfaces.
A-4

Visual Inspection

Perform a visual inspection of all equipment and peripheral
devices daily. If you notice any items that need repair, contact
an authorized service person to make the repairs.
n
Check the case and display screen for cracks or other
damage.
n
Regularly inspect all plugs, cords, cables, and
connectors for fraying or other damage.
n
Verify that all cords and connectors are securely seated.
n
Inspect keys and controls for proper operation.
u
Toggle keys should not stick in one position.
u
Knobs should rotate fully in both directions.
MAC 5000 System — 2000657-024, Revision A