Analog Outputs - GE MAC 5000 Operator's Manual

Analog Outputs

Select this function to define the system's output signals
when connecting additional equipment to the system.
System Setup
ECG
MAC 5000 System — 2000657-024, Revision A
ECG
Analog Outputs
057A, 168A,
Defining the System Setup: Define the ECG Setup
Figure 12-18. Analog Outputs
Item Description
Fast Analog Select Not Use d, I , II , or V1-V6.
Output
TTL Output Select Not Used or QRS Detect to define
TTL Output .
Polarity Select Positive or Negative to define TTL
Output polarity.
Width Type a value between 0 and 48 to define
TTL Output signal width in milliseconds.
Delay Type a value between 0 and 100 to set a
delay in milliseconds for the TTL Output
QRS detector signal.
QRS Beep Select On to hear a beep for each QRS
complex.
12-31