Quadra-Fire QFP38-LP Owner's Manual page 59

• Position the slot in the log over the tab in front of the rear
burner. See Figure 15.9.
Figure 15.9 Position Log #4061-173
• Adjust log forward for NG and push back for LP. There
is only a slight adjustment.
• Place this log in the right-hand groove in the back log
and the tab as shown. See Figure 15.10.
Lays in groove
in back log
Figure 15.10 Position Leg #4061-174
• Place this log in the left-hand groove in the back log and
the tab as shown. See Figure 15.11.
Lays in groove
in back log
Slot over tab
Figure 15.11 Position Log #4061-175
•
•
Slot over tab
Figure 15.13 Position Log #4061-177
•
Figure 15.14 Almost Final Log Set
Quadra-Fire • QFP38 Series • 4061-300 Rev i • 9/09
Place this log in the white-painted groove of ember bed
and front log. See Figure 15.12.
Figure 15.12 Position Log #4061-176
Place this log in the white-painted groove of ember bed
and front log as shown in Figure 15.13.
The overall placement of the fi rst eight logs is shown in
Figure 15.14.
Lays in groove
in front log
59