Fan Control; Key Lock Function - Salus FC600 Instruction Manual

3. 7 Fan Control

Tap on fan icon.
By default, the Fan is on only when the Fan Coil calls for heating or cooling. You can change the default setting
by changing parameter d38 in Installer Mode. On details regarding the installer mode, please check page 49.
In program mode, the default fan mode is automatic. The fan mode can be changed to Manual by pressing the
Fan button. The fan returns to the automatic default mode until next program time.
The fan is controlled by the TPI method. TPI is a learning algorithm for the fan. It tells the fan in which speed it
has to run in order to be most economy efficient. Not that it only sets the speed depending on the difference
between the room temperature and the set point temperature, it also figures out the thermo patterns in your
house/office to result into the best energy saving plan.

3.8 Key lock function

The application gives you the possibility to lock the keys on your device. Simply tap the lock icon
screen to lock. To unlock, tap it again. When the keys are locked, the user can't press any keys on the device.
You can also change the key lock settings in parameter settings, by changing the d37 value in Installer Mode.
Please check page 51.
31 Fan Coil FC600 Instruction Manual
Tap lock icon.
Tap the fan icon on your App screen
and a sub-menu with fan speeds
(1-3, Auto and Off ) will appear. Make
your selection.
Choose fan speed
Thermostat locked. Tap to
unlock.
Thermostat unlocked.
on the