Denkovi DAEnetIP2 User Manual page 8

4.2. Steps for loading default settings
In case the access of the module is lost, factory (default settings) may be applied and
the module parameters will be returned back as those in point 4.1 from the current
document.
1. Turn off the power supply of the device
2. Move the jumper from position 1 to position 2
3. Turn on the power supply of the device
4. Move the jumper from position 2 to position 1
5. Turn off the power supply of the device
6. Turn on the power supply of the device
Figure 4. Loading default settings
DAEnetIP2 User Manual
12 Sep 2013
-8-