Technical Parameters - Denkovi DAEnetIP2 User Manual

2. Technical parameters

Parameter
Size
Power supply voltage
CPU power supply (output level 3.3VDC)
Digital I/O count
Analog inputs count
Digital inputs count
Default settings jumper
LED (Link, Activity,
Power On)
Save I/O states
DHCP
Network parameters
MAC lock (protection)
SNMPv1
Read-Write Community String
Read-Only Community String
SNMP traps
SNMP I/O access commands
Web server for configuration/access
TFTP client for remote firmware update
Command for TFTP update
(Web,SNMP)
Enable/Disable TFTP update
1) These digital inputs are the analog inputs, but the input voltage is software converted to 1 or 0
1)
DAEnetIP2 User Manual
Table 1. Technical parameters
Value
43x55mm
7.5 - 25VDC
3.3V
2x8
8 (10bit ADC, Vref=3.3V)
8
Yes
Yes
Yes
Yes
IP/Mask/Default gateway
Yes
Yes (snmpget,snmpset)
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
12 Sep 2013
-4-