Features - Denkovi DAEnetIP2 User Manual

1. Features

DAEnetIP2 is multifunctional Ethernet device (IP controller) for management and
control. It could be used for industrial and home automation, access control, fire and
security systems or embedding in other systems. It is suitable also for controlling
relay boards and tracking different sensors via internet.
• 10 Mb Ethernet interface with Link/Activity Led
•
Power supply 7.5 - 25VDC
• Low power consuption (<50mA/12V)
• 8 analog inputs with 10 bit resolution (0-3.3VDC) (no pull-up or pull-down
resistors)
• 16 (2x8) bit configurable digital I/O port (0-3.3VDC)
• Standart protocols: ARP, IP, ICMP (ping), DHCP
• Supports snmp v1 (snmpset, snmpget, snmptrap), HTTP (web server with
autorization) , TFTP (for firmware upgrade)
• Ports for SNMP (161) and HTTP (80) can be changed
• Two MAC addresses protection
• It can be configured with SNMP requests or web browser
• Integrated WEB server for all functions/parameters access. I/O lines labels
can be changed via browser.
• Reset of the digital outputs on incoming/outgoing ping timeout
• Function "load outputs states from EEPROM on boot"
• Each I/O line can be named by user via web browser
• It can send traps according analog ADC level
• One analog inputs may be referred to control one digital output according its
input level
• Working temperature range: 0ºC to 70ºC
DAEnetIP2 User Manual
12 Sep 2013
-3-