Appendix 7. Http Api Commands - Denkovi DAEnetIP2 User Manual

14.

Appendix 7. HTTP API commands

DAEnetIP2 i/o lines can be controlled/accessed via HTTP API commands and
basic access authentication is required to do that. The controller supports only 2
HTTP API commands: for read and write all the i/o lines.
The digital outputs (P3 and P5) can be controlled by sending this HTTP command:
http://admin:admin@device.ip.address/iochange.cgi?ref=re-io&01=00&02=FF
admin:admin are the username:password
device.ip.address is the DAEnetIP2 IP address (by default it is 172.16.100.2)
01=00 is the state of P3 DO
02=FFis the state of P5 DO
For example:
http://admin:admin@172.16.100.2/iochange.cgi?ref=re-io&01=00&02=FF
The i/o states (P3, P5, P6) can be retreived by sending this HTTP command:
http://admin:admin@device.ip.address/ioreg.js
it will be received javascript file with several variables and one of them is:
var IO=new Array
(0xFF,0xFF,0x80,0x00AB,0x0049,0x0118,0x014A,0x012F,0x003E,0x0029,0x01DD)
Bytes 0 and 1 are the digital I/O states (in hex format)
Bytes 3...10 are the Analog inputs values (in hex format)
For example:
http://admin:admin@172.16.100.2/ioreg.js
DAEnetIP2 User Manual
12 Sep 2013
-47-