Displaying And Maintaining Ipsec - HP FlexNetwork 10500 Series Security Configuration Manual

displays notifications. For more information about SNMP notifications, see Network Management
and Monitoring Configuration Guide.
To generate and output SNMP notifications for a specific IPsec failure or event type, perform the
following tasks:
1. Enable SNMP notifications for IPsec globally.
2. Enable SNMP notifications for the failure or event type.
To configure SNMP notifications for IPsec:
Step
1. Enter system view
2. Enable SNMP
notifications for IPsec
globally.
3. Enable SNMP
notifications for the
specified failure or event
types.

Displaying and maintaining IPsec

Execute display commands in any view and reset commands in user view.
Task
Display IPsec policy information.
Display IPsec policy template information.
Display IPsec profile information.
Display IPsec transform set information.
Display IPsec SA information.
Display IPsec statistics.
Display IPsec tunnel information.
Clear IPsec SAs.
Clear IPsec statistics.
Command
system-view
snmp-agent trap enable ipsec
global
snmp-agent trap enable ipsec
[ auth-failure | decrypt-failure |
encrypt-failure | invalid-sa-failure |
no-sa-failure | policy-add |
policy-attach | policy-delete |
policy-detach | tunnel-start |
tunnel-stop ] *
Command
display ipsec { ipv6-policy | policy } [ policy-name
[ seq-number ] ]
display ipsec { ipv6-policy-template |
policy-template } [ template-name [ seq-number ] ]
display ipsec profile [ profile-name ]
display ipsec transform-set [ transform-set-name ]
display ipsec sa [ brief | count | interface interface-type
interface-number | { ipv6-policy | policy } policy-name
[ seq-number ] | profile policy-name | remote [ ipv6 ]
ip-address ]
display ipsec statistics [ tunnel-id tunnel-id ]
display ipsec tunnel { brief | count | tunnel-id
tunnel-id }
reset ipsec sa [ { ipv6-policy | policy } policy-name
[ seq-number ] | profile policy-name | remote
{ ipv4-address | ipv6 ipv6-address } | spi { ipv4-address |
ipv6 ipv6-address } { ah | esp } spi-num ]
reset ipsec statistics [ tunnel-id tunnel-id ]
300
Remarks
N/A
By default, SNMP notifications for
IPsec are disabled.
By default, SNMP notifications for
all failure and event types are
disabled.