HP FlexNetwork 10500 Series Security Configuration Manual page 223

Port security parameters:
Port security
AutoLearn aging time
Disableport timeout
MAC move
Authorization fail
OUI value list
GigabitEthernet1/0/1 is link-up
Port mode
NeedToKnow mode
Intrusion protection mode
Security MAC address attribute
Learning mode
Aging type
Max secure MAC addresses
Current secure MAC addresses
Authorization
# After users pass authentication, display MAC authentication information. Verify that port
GigabitEthernet 1/0/1 allows multiple MAC authentication users to be authenticated.
[Device] display mac-authentication interface gigabitethernet 1/0/1
Global MAC authentication parameters:
MAC authentication
Username format
Username
Password
Offline detect period
Quiet period
Server timeout
Authentication domain
Max MAC-auth users
Online MAC-auth users
Silent MAC users:
MAC address
GigabitEthernet1/0/1 is link-up
MAC authentication
Authentication domain
Auth-delay timer
Re-auth server-unreachable : Logoff
Guest VLAN
Guest VLAN auth-period
Critical VLAN
Critical voice VLAN
Host mode
Offline detection
Authentication order
: Enabled
: 0 min
: 30 s
: Denied
: Online
: macAddressElseUserLoginSecure
: NeedToKnowOnly
: NoAction
: Sticky
: Periodical
: 64
: 0
: Permitted
: Enabled
: MAC address in uppercase(XX-XX-XX-XX-XX-XX)
: mac
: Not configured
: 300 s
: 180 s
: 100 s
: sun
: 4294967295 per slot
: 3
VLAN ID From port
: Enabled
: Not configured
: Disabled
: Not configured
: 30 s
: Not configured
: Disabled
: Single VLAN
: Enabled
: Default
209
Port index