HP FlexNetwork 10500 Series Security Configuration Manual page 33

the device. A local user is uniquely identified by the combination of a username and a user type.
Local users are classified into the following types:
•
Device management user—User who logs in to the device for device management.
•
Network access user—User who accesses network resources through the device.
The following shows the configurable local user attributes:
•
Service type—Services that the user can use. Local authentication checks the service types of
a local user. If none of the service types is available, the user cannot pass authentication.
Service types include FTP, HTTP, HTTPS, LAN access, portal, SSH, Telnet, and terminal.
•
User state—Whether or not a local user can request network services. There are two user
states: active and blocked. A user in active state can request network services, but a user in
blocked state cannot.
•
Upper limit of concurrent logins using the same user name—Maximum number of users
who can concurrently access the device by using the same user name. When the number
reaches the upper limit, no more local users can access the device by using the user name.
•
User group—Each local user belongs to a local user group and has all attributes of the group.
The attributes include the password control attributes and authorization attributes. For more
information about local user group, see
•
Binding attributes—Binding attributes control the scope of users, and are checked during
local authentication of a user. If the attributes of a user do not match the binding attributes
configured for the local user account, the user cannot pass authentication. Binding attributes
include the IP address, access port, MAC address, and native VLAN. For support and usage
information about binding attributes, see
•
Authorization attributes—Authorization attributes indicate the user's rights after it passes
local authentication. Authorization attributes include the ACL, idle cut feature, user role, VLAN,
and FTP/SFTP/SCP working directory. For support information about authorization attributes,
see "Configuring local user
Configure the authorization attributes based on the service type of local users.
You can configure an authorization attribute in user group view or local user view. The setting of
an authorization attribute in local user view takes precedence over the attribute setting in user
group view.
The attribute configured in user group view takes effect on all local users in the user group.
The attribute configured in local user view takes effect only on the local user.
•
Password control attributes—Password control attributes help control password security for
device management users. Password control attributes include password aging time, minimum
password length, password composition checking, password complexity checking, and login
attempt limit.
You can configure a password control attribute in system view, user group view, or local user
view. A password control attribute with a smaller effective range has a higher priority. For more
information about password management and global password configuration, see
password
Local user configuration task list
Tasks at a glance
(Required.)
(Optional.) Configuring user group attributes
(Optional.) Displaying and maintaining local users and local user groups
Configuring local user attributes
When you configure local user attributes, follow these guidelines:
attributes."
control."
Configuring local user attributes
"Configuring user group
"Configuring local user
19
attributes."
attributes."
"Configuring