HP FlexNetwork 10500 Series Security Configuration Manual page 49

Step
1. Enter system view.
2. Enter HWTACACS
scheme view.
3. Specify HWTACACS
authorization servers.
Specifying the HWTACACS accounting servers
You can specify one primary accounting server and up to 16 secondary accounting servers for an
HWTACACS scheme. When the primary server is not available, the device searches for the
secondary servers in the order they are configured. The first secondary server in active state is used
for communication.
If redundancy is not required, specify only the primary server. An HWTACACS server can act as the
primary accounting server of one scheme and as the secondary accounting server of another
scheme at the same time.
HWTACACS does not support accounting for FTP, SFTP, and SCP users.
To specify HWTACACS accounting servers for an HWTACACS scheme:
Step
1. Enter system view.
2. Enter HWTACACS
scheme view.
3. Specify HWTACACS
accounting servers.
Command
system-view
hwtacacs scheme
hwtacacs-scheme-name
•
Specify the primary HWTACACS
authorization server:
primary authorization
{ host-name | ipv4-address | ipv6
ipv6-address } [ port-number |
key { cipher | simple } string |
single-connection |
vpn-instance
vpn-instance-name ] *
•
Specify a secondary HWTACACS
authorization server:
secondary authorization
{ host-name | ipv4-address | ipv6
ipv6-address } [ port-number |
key { cipher | simple } string |
single-connection |
vpn-instance
vpn-instance-name ] *
Command
system-view
hwtacacs scheme
hwtacacs-scheme-name
•
Specify the primary HWTACACS
accounting server:
primary accounting { host-name
| ipv4-address | ipv6
ipv6-address } [ port-number | key
{ cipher | simple } string |
single-connection |
vpn-instance
vpn-instance-name ] *
•
Specify a secondary HWTACACS
accounting server:
secondary accounting
{ host-name | ipv4-address | ipv6
ipv6-address } [ port-number | key
{ cipher | simple } string |
single-connection |
vpn-instance
vpn-instance-name ] *
35
Remarks
N/A
N/A
By default, no authorization server
is specified.
Two HWTACACS authorization
servers in a scheme, primary or
secondary, cannot have the same
combination of hostname, IP
address, port number, and VPN.
Remarks
N/A
N/A
By default, no accounting server
is specified.
Two HWTACACS accounting
servers in a scheme, primary or
secondary, cannot have the same
combination of hostname, IP
address, port number, and VPN.