Radius Attributes - HP FlexNetwork 10500 Series Security Configuration Manual

RADIUS attributes

Commonly used standard RADIUS attributes
No. Attribute
1 User-Name
2 User-Password
3 CHAP-Password
4 NAS-IP-Address
5 NAS-Port
6 Service-Type
7 Framed-Protocol
8 Framed-IP-Address
11 Filter-ID
12 Framed-MTU
14 Login-IP-Host
15 Login-Service
18 Reply-Message
26 Vendor-Specific
27 Session-Timeout
28 Idle-Timeout
31 Calling-Station-Id
32 NAS-Identifier
40 Acct-Status-Type
Description
Name of the user to be authenticated.
User password for PAP authentication, only present in Access-Request
packets when PAP authentication is used.
Digest of the user password for CHAP authentication, only present in
Access-Request packets when CHAP authentication is used.
IP address for the server to use to identify the client. Typically, a client is
identified by the IP address of its access interface. This attribute is only
present in Access-Request packets.
Physical port of the NAS that the user accesses.
Type of service that the user has requested or type of service to be
provided.
Encapsulation protocol for framed access.
IP address assigned to the user.
Name of the filter list.
MTU for the data link between the user and NAS. For example, this
attribute can be used to define the maximum size of EAP packets
allowed to be processed in 802.1X EAP authentication.
IP address of the NAS interface that the user accesses.
Type of the service that the user uses for login.
Text to be displayed to the user, which can be used by the server to
communicate information, for example, the reason of the authentication
failure.
Vendor-specific proprietary attribute. A packet can contain one or more
proprietary attributes, each of which can contain one or more
subattributes.
Maximum service duration for the user before termination of the session.
Maximum idle time permitted for the user before termination of the
session.
User identification that the NAS sends to the server. For the LAN access
service provided by an HPE device, this attribute includes the MAC
address of the user in the format HHHH-HHHH-HHHH.
Identification that the NAS uses to identify itself to the RADIUS server.
Type of the Accounting-Request packet. Possible values include:
•
1—Start.
•
2—Stop.
•
3—Interim-Update.
•
7—Accounting-On. (Defined in the 3rd Generation Partnership
Project.)
•
8—Accounting-Off. (Defined in the 3rd Generation Partnership
Project.)
•
9 to 14—Reserved for tunnel accounting.
•
15—Reserved for failed.
14