Configuring An Ssh User - HP FlexNetwork 10500 Series Security Configuration Manual

Step
1. Enter system view.
2. Import a client's public key
from the public key file.

Configuring an SSH user

Configure an SSH user and a local user depending on the authentication method.
•
If the authentication method is publickey, you must create an SSH user and a local user on the
SSH server. The two users must have the same username, so that the SSH user can be
assigned the correct working directory and user role.
•
If the authentication method is password, you must perform one of the following tasks:
For local authentication, configure a local user on the SSH server.
For remote authentication, configure an SSH user on a remote authentication server, for
example, a RADIUS server.
You do not need to create an SSH user by using the ssh user command. However, if you want
to display all SSH users, including the password-only SSH users, for centralized management,
you can use this command to create them. If such an SSH user has been created, make sure
you have specified the correct service type and authentication method.
•
If the authentication method is password-publickey or any, you must create an SSH user on
the SSH server and perform one of the following tasks:
For local authentication, configure a local user on the SSH server.
For remote authentication, configure an SSH user on a remote authentication server, for
example, a RADIUS server.
In either case, the local user or the SSH user configured on the remote authentication server
must have the same username as the SSH user.
For information about configuring local users and remote authentication, see
Configuration restrictions and guidelines
When you configure an SSH user, follow these restrictions and guidelines:
•
An SSH server supports up to 1024 SSH users.
•
For an SFTP or SCP user, the working directory depends on the authentication method.
If the authentication method is password, the working directory is authorized by AAA.
If the authentication method is publickey or password-publickey, the working folder is
specified by the authorization-attribute command in the associated local user view.
•
For an SSH user, the user role also depends on the authentication method.
If the authentication method is password, the user role is authorized by the remote AAA
server or the local device.
If the authentication method is publickey or password-publickey, the user role is specified
by the authorization-attribute command in the associated local user view.
•
If you change the authentication parameters for a logged-in SSH user, the change takes effect
on the user at the next login.
•
For all authentication methods except password authentication, you must specify a client's host
public key or digital certificate.
For a client that sends the user's public key information directly to the server, specify the
client's host public key on the server. The specified public key must already exist. For more
information about public keys, see
Command
system-view
public-key peer keyname import sshkey filename
"Configuring a client's host public
363
"Configuring AAA."
key."