Sftp Configuration Example Based On 192-Bit Suite B Algorithms - HP FlexNetwork 10500 Series Security Configuration Manual

-rwxrwxrwx
drwxrwxrwx
# Rename directory new1 to new2 and verify the result.
sftp> rename new1 new2
sftp> dir -l
-rwxrwxrwx
-rwxrwxrwx
-rwxrwxrwx
drwxrwxrwx
-rwxrwxrwx
drwxrwxrwx
# Download the file pubkey2 from the server and save it as a local file public.
sftp> get pubkey2 public
Fetching / pubkey2 to public
/pubkey2
# Upload the local file pu to the server, save it as puk, and verify the result.
sftp> put pu puk
Uploading pu to / puk
sftp> dir -l
-rwxrwxrwx
-rwxrwxrwx
-rwxrwxrwx
drwxrwxrwx
drwxrwxrwx
-rwxrwxrwx
-rwxrwxrwx
sftp>
# Exit SFTP client view.
sftp> quit
<SwitchA>
SFTP configuration example based on 192-bit Suite B
algorithms
Network requirements
As shown in
•
Switch A acts as an SFTP client (SSH2).
•
Switch B acts as the SFTP server (SSH2), and it uses publickey authentication.
•
Switch B uses the following algorithms for the algorithm negotiation with the SFTP client:
Key exchange algorithm ecdh-sha2-nistp384.
Encryption algorithm aes256-gcm.
Public key algorithm x509v3-ecdsa-sha2-nistp384.
Configure Switch A to establish an SFTP connection to Switch B based on the 192-bit Suite B
algorithms. After the connection is established, you can log in to Switch B to manage and transfer
files.
1 noone nogroup
1 noone nogroup
1 noone nogroup
1 noone nogroup
1 noone nogroup
1 noone nogroup
1 noone nogroup
1 noone nogroup
1 noone nogroup
1 noone nogroup
1 noone nogroup
1 noone nogroup
1 noone nogroup
1 noone nogroup
1 noone nogroup
Figure 114:
225 Sep 01 06:55 pub
0 Sep 02 06:30 new1
1759 Aug 23 06:52 config.cfg
225 Aug 24 08:01 pubkey2
283 Aug 24 07:39 pubkey
0 Sep 01 06:22 new
225 Sep 01 06:55 pub
0 Sep 02 06:33 new2
100% 225
1759 Aug 23 06:52 config.cfg
225 Aug 24 08:01 pubkey2
283 Aug 24 07:39 pubkey
0 Sep 01 06:22 new
0 Sep 02 06:33 new2
283 Sep 02 06:35 pub
283 Sep 02 06:36 puk
402
1.4KB/s 00:00