Introduction - Mira Excel Installation & User Manual

Thank you for purchasing a quality Mira product. To enjoy the full potential of your
new product, please take time to read this guide thoroughly, having done so, keep it
handy for future reference.
The Mira Excel is a thermostatic shower control with independent selection of spray
force and temperature. The shower control incorporates a wax capsule temperature
sensing unit. This provides an almost immediate response to changes in pressures
or temperature of the incoming water supplies to maintain the selected temperature.
An adjustable maximum temperature stop is provided which limits the temperature to
the desired level. An override button allows the user to exceed the preset maximum
temperature. The flow control utilizes ceramic plate technology operating directly on
the hot and cold inlets to provide precise control and isolation of the incoming water
supplies. Inlet filters are fitted to protect the thermostatic control mechanism.
The Mira Excel (Exposed Version) has adjustable inlets to fit pipework centres between
150 mm and 155 mm.
Shower controls covered by this guide:
Mira Excel
An exposed shower control for connection to wall mounted or rear entry pipework.
Mira Excel B
A built-in shower control for connection to concealed pipework.
If you experience any difficulty with the installation or operation of your new shower
control, then please refer to "Fault Diagnosis", before contacting Kohler Mira Limited.
Our telephone and fax numbers can be found on the back cover of this guide.

INTRODUCTION

3