Mira Excel Installation & User Manual page 20

Falling Supplies
2.18 Follow the installation instructions 2.1
to 2.10 inclusive.
2.19 Use the O-Key to remove the outlet
nipple.
2.20 Carefully lever the outlet cap from the
outlet blanking plug in the shower
control body.
2.21 Use the O-Key to remove the outlet
blanking plug.
2.22 Screw the outlet nipple, complete with
'O' seal into the hole previously
blanked. Tighten the outlet nipple with
the O-Key.
2.23 Screw the outlet blanking plug,
complete with 'O' seal, into the outlet
hole between the two inlet nipples.
Tighten the outlet blanking plug with
the O-Key.
2.24 Fit the outlet cap correctly. The
matching contours of the outlet cap
and shower control body must be
aligned.
2.25 Locate the Excel shower control on to
the backplate.
Outlet Cap
Outlet Blanking
Plug
20
Outlet Nipple
Tapered End