Exposed Supplies (Rising Or Falling Surface Pipework) - Mira Excel Installation & User Manual

2. Exposed supplies (rising or falling surface pipework)

Read the section: Installation Requirements first.
Rising Supplies
2.1 Decide on a suitable position for the
shower control. The position of the
shower control and the shower fittings
must provide a minimum gap of 25
mm between the spill-over level of the
shower tray/bath and the handset. This
is to prevent back-siphonage.
2.2 Use the installation template to mark
the positions of the holes for the
backplate and the pipe centres.
2.3 For solid walls drill the backplate holes
with a 6 mm diameter drill and insert
the wall plugs (supplied). For other
types of wall structure alternative fixing
may be required.
2.4 Fix the backplate to the wall with the
two fixing screws (supplied). Make
sure that the angled fixing holes are at
the bottom of the backplate.
Installation Template
Fixing Screw
17
Hose Retaining Ring
25 mm Minimum
Spill-over Level
Wall Plug
Backplate