Table of Contents
Advertisement
Excel
1. Back inlet supplies (rising or falling concealed pipework)
Read the section: Installation Requirements first.
1.1 Decide on a suitable position for the
shower control. The position of the
shower control and the shower fittings
must provide a minimum gap of 25
mm between the spill-over level of the
shower tray/bath and the handset. This
is to prevent back-siphonage.
1.2 Use the installation template to mark
the positions of the holes for the
backplate and the pipe centres.
1.3 For solid walls drill the backplate holes
with a 6 mm diameter drill and insert
the wall plugs (supplied). For other
types of wall structure alternative fixing
may be required.
1.4 Use the two No. 8 x 1 3/4" fixing
screws (supplied) to fix the backplate
to the wall. Make sure that the two
angled fixing holes are at the bottom
of the backplate.
INSTALLATION
Installation Template
14
Hose Retaining Ring
25 mm Minimum
Spill-over Level
Spirit Level
Wall Plug
Fixing Screw
Backplate
Hide quick links:
Advertisement
Table of Contents
