Mira Excel Installation & User Manual page 16

1.10 Thoroughly flush the hot and cold
water supply pipes. The supplies
must be clean and free from debris
before connecting the shower
control. Failure to do so may result
in product malfunction.
1.11 Slide the compression nuts and olives
over the supply pipes.
1.12 Locate the Excel shower control on to
the backplate and supply pipes and
hold it in position.
Note! Align the adjustable inlets to aid
location onto the pipework.
1.13 Use a suitable screwdriver to tighten
the two screws in the backplate. The
screws will hold the shower control in
position.
1.14 Use a suitable
tighten the compression nuts
(anticlockwise rotation when viewed
from front). Protect the chromium
plated surfaces with a cloth.
Do not overtighten.
1.15 Turn on the water supplies and check
for any leaks.
Shower fittings
1.16 Install the shower fittings. Refer to the
Installation and User Guide for the
shower fittings.
spanner to
16
Compression
Nut
Backplate
Screws
Olive