Multi-User Table; Remote View Pro Configuration - socomec NET-VISION Operating And Installation Manual

19.4. MULTI-USER TABLE

This table sets user's credential to access the NET VISION interface, NET VISION allows up to 8
user accounts.
Admin account is not managed in this table, this account is always active.
To be more effective the "
web pages.
Multi-User Table
Index User Name
1
Remark:
This table combines with the RADIUS function. NET VISION checks before on RADIUS server (if
enabled) the user account. If the user is existing on RADIUS server, NETVISION will take the RA-
DIUS account credentials. Otherwise he will check the local user account set in the

19.5. REMOTE VIEW PRO CONFIGURATION

If Remote View Pro supervision SW is running to monitor the UPS, the server IP must be report-
ed in NET VISION.
Remote View Pro SW sees NET VISION as a communication node server.
NET VISION must be added on Remote View Pro accordingly.
Remote View Pro Configuration
Server Control
Server IP
Server Port
GUID
Password
NET-VISION 7 - SOCOMEC
must be set to force the login before accessing to
HTTP Security Control"
Password

Disabled
Enabled
80
NV MAC address
To set
Access type

Disabled
Read Only
Read/Write
Multi-User table
.
GB 41