Net Vision Control - socomec NET-VISION Operating And Installation Manual

19.3. NET VISION CONTROL

Configuration
"BootP/DHCP"
"PING Echo"
"Network Upgrade"
"Force Security HTTP"
"HTTP Port"
"HTTP Security Control"
"SSH Connection"
"SNMP Support"
"SMTP Support"
"UPnP Control"
"RADIUS/Authentication"
"WOL Target"
"Modbus Configuration"
"Syslog Setup"
"DDNS Setup"
"Firewall Setup"
"SNMP Unit Select"
"SNMP TRAP / E-mail Filter"
40 GB
Default value
The ping answer can be disabled
The FW upgrade, through TFTP, from NET VISION Explorer
can be disabled.
Port 443 To enable HTTPs secure connection
Port 80 To enable web page and changing port
To force login request when web page is open
To enable remote console (such as putty tool ) for NET VI-
Port 22
SION configuration
Port 161 To enable connection to NMS
Port 25 To enable email functions
To enable NET VISION as a Network device
To enable authentication protocol page settings
To enable Wake On LAN settings page.
Protocol to restart servers when NET VISION restarts after a
shutdown due to AC failure.
To enable MODBUS TCP protocol
To enable Syslog settings page
To enable DDNS settings page
To enable Firewall settings page
0 to populate all SNMP OID with UPS data at system level.
Set to unit number to populate all SNMP OID with the local
0 for System
Unit 1 to 12
UNIT data where the NET VISION is connected.
NET VISION must be installed on each Unit.
This function enable or disable TRAP3 and TRAP4 notifica-
Disabled tion when "
e-mail.
Description
" level is set as filter to send TRAP or
severity
NET-VISION 7 - SOCOMEC