Net Vision Configuration - socomec NET-VISION Operating And Installation Manual

19.2. NET VISION CONFIGURATION

Configuration
"Upload Configuration"
"Upload CA file "
"Download Configuration"
"Download Root Certificate"
"BootP/DHCP"
"IP Address"
"Gateway Address"
"Subnet Mask"
"DNS Address"
"System Name"
"System Contact"
"System Location"
"History Log Interval (s)"
"Extend Log Interval (mn)"
"Net Vision admin Password"
"Polling Rate (s)"
"Serial Timeout (ms)"
"Temperature unit"
"SNMP read Community"
"SNMP write Community"
"Login Timeout (s)"
"Baud rate Setting"
"IPv6 Configuration"
"IPv6 Local Address"
"IPv6 Global Address"
"IPv6 Router"
NET-VISION 7 - SOCOMEC
Default value
Select the NET VISION settings backup file to restore previ-
ous settings
Select a local certificate for secure connection
Create a backup file of all NET VISION settings
Download the NV certificate to install on local computer for
secure connection
DHCP enabled Select "Static" to modify manually IP settings
192.168.7.18
Allows you to set server IP by name, instead IP value address
Name reported in SNMP OID and in email
Socomec
Additional info reported in SNMP OID and in email
Additional info reported in SNMP OID and in email
NET VISION records measurements in history log file every
60
minute (60s). Up to 2048 records
NET VISION records the minimum, average and maximum
60
measurements history log file every hour (60mn). Up to 2048
records
public To change admin account password
5 Defines the delay between 2 pollings
20 ms (56k)
50 ms (19200) Additional serial time out
100 ms (9600)
°C
Select °C or °F
public To be reported in the NMS if necessary
private To be reported in the NMS if necessary
300 Defines the time while the session is open.
Can be changed if automatic discovery is not working.
9600
2400 / 9600 / 19200 / 57600
Automatic
fe80::2e0:d8ff:feff:c1a0/64
Description
Select the IPv6 mode
To be set according to IPv6 settings
To be set according to IPv6 settings
To be set according to IPv6 settings
GB 39