System Functions - ABB MicroSCADA Pro SYS 600C 2.93 Product Manual

SYS 600C 2.93
5.2.3
32
MicroSCADA Pro
Product Guide
User interface Description
option
LIB 520 IED Tools Select this option, if you want to integrate LIB 520 IED
Tools in the Workplace.
If you use only the IED tools in the Workplace, no other
LIB license in needed.
LIB 530 IED Tools Select this option, if you want to integrate LIB 530 IED
Tools in the Workplace.
If you use only the IED tools in the Workplace, no other
LIB license in needed.

System functions

The following tables list the SYS 600C system functions.
Table 5.4: System size parameters
System size Description
parameters
Process I/O Number of process objects connected to the process
Table 5.5: System options and interfaces
System option Description
and interface
Control This option enables control commands to be issued from
the system.
This option should normally be selected. This option can
be left out in pure monitoring systems, where no output
process objects are needed.
You also need this option in gateway systems, if com-
mands are propagated through the gateway.
History Data Log- This option is needed for example, for the Measurement
ging Reports. This option is not needed for the standard
Trends.
Without this option, the number of Data Object entries is
limited to 100 000.
Hot-Stand-By re- Select this option, if you have a redundant pair of servers
dundancy (HSB) using the Hot-Stand-By function.
1MRS757729
Value
Yes/No
Yes/No
Value
1..20 000
Gateway function-
ality (COM 500i)
supports maxim-
um 14 000 indica-
tions and 14 000
commands con-
figured within SYS
600C.
Value
Yes/No
Yes/No
Yes/No