Vega VEGABAR 51 Operating Instructions Manual page 29

Pressure transmitter, profibus pa

Hide thumbs Also See for VEGABAR 51:

Table of Contents

VEGABAR 51 • Proﬁbus PA

Internal check of the electronics

Indication of the instrument type, the ﬁrmware as well as the

sensor TAGs (sensor designation)

Status byte goes brieﬂy to fault value

Then the current measured value will be displayed and the

corresponding digital output signal will be outputted to the cable.

The values correspond to the actual measured level as well as to the set-

tings already carried out, e.g. default setting.

5 Connecting to power supply

Table of Contents