Parameter Adjustment With Pactware; Parameter Adjustment With Pdm; Saving The Parameter Adjustment Data - Vega VEGABAR 51 Operating Instructions Manual

VEGABAR 51 • Profibus PA
7 Setup with PACTware and other adjustment programs
Necessary components:
VEGABAR 51
l
PC with PACTware and suitable VEGA DTM
l
VEGACONNECT
l
Power supply unit or processing system
l

7.2 Parameter adjustment with PACTware

Further setup steps are described in the operating instructions manual
"DTM Collection/PACTware" attached to each CD and which can also
be downloaded from our homepage. A detailed description is available
in the online help of PACTware and the VEGA DTMs.
Note:
Keep in mind that for setup of VEGABAR 51, DTM-Collection in the
actual version must be used.
All currently available VEGA DTMs are included as a DTM Collection
on a CD. They can be purchased for a token fee from the responsible
VEGA agency. In addition, the actual PACTware version is also
available on this CD.
In addition, this DTM Collection incl. the basic version of PACTware
can be downloaded free of charge from the Internet. Move via www.
vega.com and "Downloads" to "Software".

7.3 Parameter adjustment with PDM

For VEGA sensors, instrument descriptions for the adjustment
program PDM are available as EDD. The instrument descriptions are
already implemented in the current version of PDM. For older versions
of PDM, a free-of-charge download is available via Internet.
Go via www.vega.com and "Downloads" to the item "Software".

7.4 Saving the parameter adjustment data

It is recommended to document or save the parameter adjustment
data. They are hence available for multiple use or service purposes.
The VEGA DTM Collection and PACTware in the licensed, profes-
sional version provide suitable tools for systematic project documen-
tation and storage.
47