HITEC ECLIPSE 7 Owner's Manual page 45

(ACRO)
Aircraft Section
very unusual feature for a system in the class of the Eclipse 7 and they are normally found only
on systems costing far more. As you learn to use them, you will really appreciate them.
The priority of the conditions (when all three are activated) is as follows: ST3 > (ST1,
ST2) > NOR. In words, whenever ST3 is turned on, it has priority over the other conditions. If
ST3 is not on, both ST1 and ST2 override NOR, which is only active if all the others are turned
off. This is better understood if you look at the table below:
– 45 –