Advertisement
Quick Links
Hitec Eclipse 7
DUPLEX TF module fits this transmitter well but you can also use Duplex TU and mount it
inside the transmitter. Antenna can be placed to the original place. In this case we
recommend to use HE7 assembly kit. During handling with the transmitter, it must be
switched off.It is necessary to solder. Put the transmitter on a soft pad to avoid damage.
Switch off the transmitter
Turn upside down
Unscrew 6 screws
Open rear casing
Advertisement
Related Manuals for HITEC Eclipse 7
Summary of Contents for HITEC Eclipse 7
- Page 1 Hitec Eclipse 7 DUPLEX TF module fits this transmitter well but you can also use Duplex TU and mount it inside the transmitter. Antenna can be placed to the original place. In this case we recommend to use HE7 assembly kit. During handling with the transmitter, it must be switched off.It is necessary to solder.
- Page 2 Hitec Eclipse 7 Screw off original transmitting antenna. There is connecting cabel in Duplex TU package. Cut off connector on one side. Solder carefully each electric conductor to the „instructor- student“ connector as shown on a picture. Screw off the antenna...
- Page 3 Hitec Eclipse 7 For Duplex TU module fixation, it is recommended to use parts from assembly kit HE7. Use two longer distance bars and screw the carrier board . Insert remaining distance bars for mounting Duplex TU module. Insert distance bars...
- Page 4 Hitec Eclipse 7 Fix Duplex TU module with remaining distance bars and screws from assembly kit. Connect Duplex TU module with the transmitter by cabel from assembly kit. Screw Duplex TU module to the carrier board Connect Duplex module with the transmitter by...
- Page 5 Hitec Eclipse 7 Unscrew nut and washer from antenna connector, put connector through out from the transmitter. Put inlay from assembly kit on antenna connector, put in the washer and screw the nut. Stick antenna part with glue to the transmitter.
- Page 6 Hitec Eclipse 7 Incase the transmitter with reverse procedure see page 1. Screw enclosed antenna. Installation is completed. Before using it is necessary to pair off new receiver and transmitter, see receiver manual. Mount rear casing of transmitter Screw 2.4GHz antenna...
Need help?
Do you have a question about the Eclipse 7 and is the answer not in the manual?
Questions and answers